Structural Design of Filter Cylinder Dust Collector
1. Thickened steel plate paint is used in the whole machine.
2. Dust collector adopts modular assembly design, which promotes the production cycle, standard degree, secondary expansion and explosion-proof safety performance of the equipment.
3. The overall equipment area must be small.
Selection of accessories
1. The combination of PTFE high-efficiency membrane-covered filter cartridge and pulse backflushing device ensures the filtration efficiency and service life of the whole cartridge when dealing with fine metal dust.
2. The distance between folds of PTFE-coated filter cartridges is the same. The filter cartridges are fixed by the adhesive between the upper and lower caps. The folding angle of the filter cartridge is less than 2 degrees, so that the efficiency of the filter cartridge is the best.
3. Fan
Choosing a suitable fan not only saves energy, but also is important for the service life of the filter element. With the increase of the service life of the filter cartridge, the air resistance of the filter cartridge increases slightly and is stable. The fan must be able to adjust this balance.
Price aspect
1. Designing the size of dust collector according to working conditions and air volume to achieve reasonable dust removal effect.
2. The high-end brand is 1.5-2 times more expensive than the general price. As long as the low-end earns 100 yuan, someone will do it, but do you dare to use it?